Dell Networking 7048 Reference Manual page 185

device name
[ ][([
device name
[ ] — is the name of the managed switch, which is typically the
user-configured hostname established by the hostname command.
command mode
[
top configuration levels.
object
[ ] — indicates specific object or range of objects within the
configuration mode.
For example, if the current configuration mode is config-if and the object
being operated on is gigabit ethernet 1 on unit 1, the prompt displays the
object type and unit (for example, 1/0/1).
[# | >] — The # sign is used to indicate that the system is in the Privileged
EXEC mode. The > symbol indicates that the system is in the User EXEC
mode, which is a read-only mode in which the system does not allow
configuration.
Navigating CLI Command Modes
Table 2-5 describes how to navigate through the CLI Command Mode
hierarchy.
Table 2-5. Navigating CLI Command Modes
Command Mode
User EXEC
Privileged EXEC Use the enable
command mode-
] — is the current configuration mode and is omitted for the
Access Method
The user is
automatically in
User EXEC mode
unless the user is
defined as a
privileged user.
command to enter
into this mode. This
mode is password
protected.
object
[ ]])][# | >]
Command Prompt
console>
console#
Exit or Access
Previous Mode
logout
Use the exit
command, or
press
<Ctrl>+<Z>
to return to the
User EXEC
mode.
Using the CLI
185