FF1E::/64
PIM-SM INTERFACE STATUS
Interface
Interface-Mode
---------
--------------
vlan 3
Enabled
vlan 6
Enabled
vlan 9
Enabled
show ipv6 pim bsr-router
Use the show ipv6 pim bsr-router command to display the bootstrap router
(BSR) information.
Syntax
show ipv6 pim bsr-router
Default Configuration
There is no default configuration for this command.
Command Mode
User EXEC, Privileged EXEC modes, Config mode and all Config sub-modes
User Guidelines
There are no user guidelines for this command. Field descriptions are shown
in the following table.
Field
BSR Address
BSR Priority
BSR Hash Mask
Length
Description
Address of the BSR
Configured BSR priority
Configured hash mask length
Operational-Status
----------------
Operational
Operational
Operational
IPv6 PIM Commands
1049