Dell Networking 7048 Reference Manual page 455

Syntax
traceroute ethernet cfm {mac
domain name
| level
Parameter Description
Parameter
level
mac-addr
remote-mpid
domain
vlan-id
mpid
ttl
Default Configuration
By default, the traceroute command will send loopback trace messages with a
TTL of 64.
Command Mode
Privileged EXEC
User Guidelines
This command has no user guidelines.
Example
console # linktrace src-mep 200 target-mep 400 ttl 64
mac-addr
0-7 vlan-id
} vlan
Description
Maintenance association level
The destination MAC address for which the route needs to be
traced. Either MEP ID or the MAC address option can be used.
The MEP ID for which connectivity needs to be verified; i.e.
the destination MEP ID.
Name of the maintenance domain (an alphanumeric string of
up to 43 characters in length).
A VLAN associated with the maintenance domain. Range: 1-
4094.
The MEP ID from which the link trace message is to be
transmitted.
Number of hops over which the LTM is expected to be
transmitted. The default is 64.
1-8191
| remote-mpid
1-8191
mpid [ttl
Ethernet CFM Commands
} {domain
1-255
]
455