Dell Networking 7048 Reference Manual page 163

Command
set description
slot
show banner
show boot-version
show checkpoint
statistics
show cut-through mode
show interfaces
advanced firmware
show memory cpu
show nsf
show power-usage-
history
show process cpu
show sessions
show slot
show supported cardtype
show supported
switchtype
show switch
show system
show system fan
show system id
Description
Associates a text description with a switch in
the stack.
Configures a slot in the system.
Displays banner information.
Displays the boot image version details.
Displays the statistics for the checkpointing
process.
Show the cut-through mode on the switch.
Displays the firmware revision of the PHY for a
port.
Checks the total and available RAM space on
the switch.
Shows non-stop forwarding status.
Shows the history of unit power consumption
for the unit specified in the command and total
stack power consumption.
Checks the CPU utilization for each process
currently running on the switch.
Displays a list of the open telnet sessions to
remote hosts.
Displays information about all the slots in the
system or for a specific slot.
Displays information about all card types
supported in the system.
Displays information about all supported switch
types.
Displays information about the switch status.
Displays system information.
Explicitly displays the fan status.
Displays the service ID information.
Mode
SG
GC
PE
UE
PE
PE
PE
PE
PE
PE
PE
PE
UE
UE
UE
UE
UE
UE or PE
UE
Command Groups
a
163