Voice Vlan Data Priority; Show Voice Vlan - Dell Networking 7048 Reference Manual

Example
console(config-if-Gi1/0/1)#voice vlan 1
console(config-if-Gi1/0/1)#voice vlan dot1p 1
console(config-if-Gi1/0/1)#voice vlan none
console(config-if-Gi1/0/1)#voice vlan untagged

voice vlan data priority

This command is to either trust or not trust (untrust) the data traffic arriving
on the voice VLAN port.
Syntax
voice vlan data priority {trust | untrust}
• trust Trust the dot1p priority or DSCP values contained in packets
—
arriving on the voice vlan port.
untrust
•
—
packets arriving on the voice vlan port.
Command Mode
Interface Configuration
Default Value
trust
Example
console(config-if-1/0/1)#voice vlan data priority untrust
console(config-if-1/0/1)#voice vlan data priority trust

show voice vlan

show voice vlan [interface {gigabitethernet unit/slot/port |
tengigabitethernet unit/slot/port | all}]
854
Voice VLAN Commands
Do not trust the dot1p priority or DSCP values contained in