Ipv6 Multicast - Dell Networking 7048 Reference Manual

IPv6 Multicast

Command
ipv6 pim (Global config)
ipv6 pim (VLAN Interface
config)
ipv6 pim bsr-border
ipv6 pim bsr-candidate
ipv6 pim dense
ipv6 pim dr-priority
ipv6 pim hello-interval
ipv6 pim join-prune-interval
ipv6 pim register-rate-limit
ipv6 pim register-threshold
ipv6 pim rp-address
ipv6 pim rp-candidate
ipv6 pim sparse (Global
config)
ipv6 pim spt-threshold
Description
Administratively enables PIMSM for IPv6
multicast routing
Administratively enables PIM-SM multicast
routing mode on a particular IPv6 router
interface.
Prevents bootstrap router (BSR) messages from
being sent or received through an interface.
Configures the router to announce its
candidacy as a bootstrap router (BSR).
Administratively configures PIM dense mode
for IPv6 multicast routing.
Sets the priority value for which a router is
elected as the designated router (DR).
Administratively configures the PIM-SM Hello
Interval for the specified interface.
Administratively configures the interface
join/prune interval for the PIM-SM router.
Sets a limit on the maximum number of PIM
register messages sent per second for each (S,G)
entry
Configures the Register Threshold rate for the
RP router to switch to the shortest path.
Statically configures the Rendezvous Point (RP)
address for one or more multicast groups.
Configures the router to advertise itself as a
PIM candidate rendezvous point (RP) to the
bootstrap router (BSR).
Administratively configures PIM sparse mode
for multicast routing.
Configures the Data Threshold rate for the last-
hop router to switch to the shortest path.
Command Groups
a
Mode
GC
IC
IC
GC
GC
IC
IC
IC
GC
GC
GC
GC
GC
GC
132