Dell Networking 7048 Reference Manual page 561

User Guidelines
When the optional argument vlan vlan-id is not used, the command shows
the following information:
Parameter
MLD Snooping Querier
Mode
Querier Address
MLD Version
Querier Query Interval
Querier Expiry Interval
When the optional argument vlan vlan-id is used, the following additional
information appears:
Parameter
MLD Snooping Querier
VLAN Mode
Querier Election
Participate Mode
Querier VLAN Address
Operational State
Description
Indicates whether or not MLD Snooping Querier is
active on the switch.
Shows the IP Address which will be used in the IPv6
header while sending out MLD queries.
Indicates the version of MLD that will be used while
sending out the queries. This is defaulted to MLD v1
and it can not be changed.
Shows the amount of time that a Snooping Querier
waits before sending out a periodic general query.
Displays the amount of time to wait in the Non-Querier
operational state before moving to a Querier state.
Description
Indicates whether MLD Snooping Querier is active on
the VLAN.
Indicates whether the MLD Snooping Querier
participates in querier election if it discovers the
presence of a querier in the VLAN.
Shows the IP Address which will be used in the IPv6
header while sending out MLD queries.
Indicates whether MLD Snooping Querier is in
"Querier" or "Non-Querier" state. When the switch is in
Querier state it will send out periodic general queries.
When in Non-Querier state it will wait for moving to
Querier state and does not send out any queries.
IPv6 MLD Snooping Querier Commands
561