Spanning-Tree Transmit Hold-Count - Dell Networking 7048 Reference Manual

User Guidelines
There are no user guidelines for this command.
Example
The following example configures spanning-tree tcnguard on 4/0/1.
console(config-if-4/0/1)#spanning-tree tcnguard

spanning-tree transmit hold-count

Use the spanning-tree transmit hold-count command to set the maximum
number of BPDUs that a bridge is allowed to send within a hello time window
(2 seconds). Use the no form of this command to reset the hold count to the
default value.
Syntax
value
spanning-tree transmit [hold-count] [ ]
no spanning-tree transmit
value — The maximum number of BPDUs to send (Range: 1–10).
•
Default Configuration
The default hold count is 6 BPDUs.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example sets the maximum number of BPDUs
sent to 6.
console(config)#spanning-tree transmit hold-count 6
783
Spanning Tree Commands