Dell Networking 7048 Reference Manual page 143

Command
show ip rip interface
show ip rip interface brief
split-horizon
a. For the meaning of each Mode abbreviation, see
Tunnel Interface
Command
interface tunnel
show interfaces tunnel
tunnel destination
tunnel mode ipv6ip
tunnel source
a. For the meaning of each Mode abbreviation, see
Virtual Router Redundancy
Command
ip vrrp
vrrp accept-mode
Description
Displays information related to a particular RIP
interface.
Displays general information for each RIP
interface.
Sets the RIP split horizon mode.
Mode Types
Description
Enables the interface configuration mode for a
tunnel.
Displays the parameters related to tunnel such
as tunnel mode, tunnel source address and
tunnel destination address.
Specifies the destination transport address of
the tunnel.
Specifies the mode of the tunnel.
Specifies the source transport address of the
tunnel, either explicitly or by reference to an
interface.
Mode Types
Description
Enables the administrative mode of Virtual
Router Redundancy Protocol (VRRP) for the
router.
Enables the VRRP Master to accept ping
packets sent to one of the virtual router's IP
addresses.
on page 81.
on page 81.
Command Groups
a
Mode
PE
PE
RIP
a
Mode
GC
PE
IC
IC
IC
a
Mode
GC
IC
143