Dell Networking 7048 Reference Manual page 120

Command
netbios-name-server
netbios-node-type
network
next-server
option
service dhcp
sntp
show ip dhcp binding
show ip dhcp conflict
show ip dhcp global
configuration
show ip dhcp pool
show ip dhcp server statistics
a. For the meaning of each Mode abbreviation, see
DHCPv6
Command
clear ipv6 dhcp
dns-server (IPv6 DHCP Pool
Config)
Description
Configures the IPv4 address of the Windows
Internet Naming Service (WINS) for a
Microsoft DHCP client.
Sets the NetBIOS node type for a Microsoft
DHCP client.
Defines a pool of IPv4 addresses for distributing
to clients.
Sets the IPv4 address of the TFTP server to be
used during auto-install.
Supplies arbitrary configuration information to
a DHCP client.
Enables local IPv4 DHCP server on the switch. GC
Sets the IPv4 address of the NTP server to be
used for time synchronization of the client.
Displays the configured DHCP bindings.
Displays DHCP address conflicts for all relevant
interfaces or a specified interface.
Displays the DHCP global configuration.
Displays the configured DHCP pool or pools.
Displays the DHCP server binding and message
counters.
Mode Types
Description
Clears DHCPv6 statistics for all interfaces or for
a specific interface.
Sets the IPv6 DNS server address which is
provided to a DHCPv6 client by the DHCPv6
server.
®
on page 81.
Command Groups
a
Mode
DP
DP
DP
DP
DP
DP
PE
PE
PE
UE or
PE
PE
a
Mode
PE
v6DP
120