Show Ip Address-Conflict - Dell Networking 7048 Reference Manual

Host
--------------------------
accounting.gm.com
Cache:
Host
----------------
www.stanford.edu

show ip address-conflict

Use the show ip address-conflict command in User EXEC or Privileged
EXEC mode to display the status information corresponding to the last
detected address conflict.
Syntax
show ip address-conflict
Parameter Description
This command does not require a parameter description.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
The command provides the following information.
Term
Address Conflict
Detection Status
528
IP Addressing Commands
Addresses
----------------------------
176.16.8.8
TTL (Hours)
Total Elapsed
----- -------
72 3
Description
Whether the switch has detected an address conflict on any IP
address. Set to Conflict Detected if detected, No Conflict
Detected otherwise.
Type Addresses
------- -------------
IP 171.64.14.203