Dns-Server (Ip Dhcp Pool Config) - Dell Networking 7048 Reference Manual

Command Mode
DHCP Pool Configuration mode
User Guidelines
This command has no user guidelines.
Example
console(config-dhcp-pool)#default-router 192.168.22.1 192.168.23.1

dns-server (IP DHCP Pool Config)

Use the dns-server command in IP DHCP Pool Configuration mode to set
the IP DNS server address which is provided to a DHCP client by the DHCP
server. DNS server address is configured for stateless server support.
Syntax
ip-address1
dns-server
no dns-server
Parameter Description
Parameter
ip-address1
Default Configuration
This command has no default configuration.
Command Mode
IP DHCP Pool Configuration mode
User Guidelines
This command has no user guidelines.
912
DHCP Server and Relay Agent Commands
Description
Valid IPv4 address.