Default Configuration - Dell Networking 7048 Reference Manual

Keyword
enable
line
none
radius
tacacs

Default Configuration

The default enable list is enableList. It is used by console, telnet, and SSH
and only contains the method
Command Mode
Global Configuration mode
User Guidelines
The default and optional list names created with the aaa authentication
enable command are used with the enable authentication command.
Create a list by entering the aaa authentication enable
command where
method
argument identifies the list of methods that the authentication
algorithm tries in the given sequence.
The additional methods of authentication are used only if the previous
method returns an error, not if it fails to authenticate the user. Only the
RADIUS or TACACS methods can return an error. To ensure that the
authentication succeeds even if all methods return an error, specify none as
the final method in the command line. Note that enable will not succeed for
a level one user if no authentication method is defined. A level one user must
authenticate to get to privileged EXEC mode. For example, if none is
specified as an authentication method after radius, no authentication is used
if the RADIUS server is down.
NOTE: Requests sent by the switch to a RADIUS server include the username
"$enabx$", where x is the requested privilege level. For enable to be authenticated
on Radius servers, add "$enabx$" users to them. The login user ID is also sent to
TACACS+ servers for enable authentication.
250
AAA Commands
Source or destination
Uses the enable password for authentication.
Uses the line password for authentication.
Uses no authentication.
Uses the list of all RADIUS servers for authentication.
Uses the list of all TACACS+ servers for authentication.
none
list-name
is any character string used to name this list. The
.
list-name method