Command
match ip tos
match protocol
match source-address mac
match srcip
match srcip6
match srcl4port
match vlan
mirror
police-simple
police-two-rate
policy-map
random-detect queue-
parms
Description
Adds to the specified class definition a match
condition based on the value of the IP TOS
field in a packet.
Adds to the specified class definition a match
condition based on the value of the IP Protocol
field in a packet using a single keyword
notation or a numeric value notation.
Adds to the specified class definition a match
condition based on the source MAC address of
the packet.
Adds to the specified class definition a match
condition based on the source IP address of a
packet.
Adds to the specified class definition a match
condition based on the source IPv6 address of a
packet.
Adds to the specified class definition a match
condition based on the source layer 4 port of a
packet using a single keyword, a numeric
notation, or a numeric range notation.
Adds to the specified class definition a match
condition based on the value of the layer 2
VLAN Identifier field.
Mirrors all the data that matches the class
defined to the destination port specified.
Implements simple color aware marking for the
specified class.
Implements a two-rate Three Color
Marker (trTCM) per RFC 2698.
Establishes a new DiffServ policy or enters
policy map configuration mode.
Configures the green, yellow and red TCP and
non-TCP packet minimum and maximum
thresholds and corresponding drop
probabilities on an interface or all interfaces.
Command Groups
a
Mode
CMC
CMC
CMC
CMC
v6CMC
CMC
CMC
PCMC
PCMC
PCMC
GC
GC, IC,
or IR
107