Dell Networking 7048 Reference Manual page 522

autoconfig—Use this keyword to set the IPv6 address auto configuration
•
mode.
• dhcp—Use this keyword to obtain an IPv6 address via DHCP.
Default Configuration
There is no IPv6 address configured by default.
Command Mode
Interface Configuration mode (VLAN, loopback, port-channel)
User Guidelines
When setting the prefix length on an IPv6 address, no space can be present
between the address and the mask.
Example
Configure ipv6 routing on vlan 10 and obtain an address via DHCP . Assumes
vlan 10 already exists.
console(config)#ip routing
console(config)#interface vlan 10
console(config-if-vlan10)#ipv6 enable
console(config-if-vlan10)#ipv6 address dhcp
Configure a default gateway on vlan 10
console(config)#no ipv6 address autoconfig
console(config)#no ipv6 address 2003::6/64
console(config)#no ipv6 address 2001::/64 eui64
522
IP Addressing Commands