Dell Networking 7048 Reference Manual page 114

Command
show dvlan-tunnel interface
show interfaces switchport
show port protocol
show vlan
show vlan association mac
show vlan association subnet
show vlan private-vlan
switchport access vlan
switchport general forbidden
vlan
switchport general
acceptable-frame-type
tagged-only
switchport general allowed
vlan
switchport general ingress-
filtering disable
switchport general pvid
switchport mode
switchport mode private-
vlan
Description
Displays detailed information about Double
VLAN Tunneling for the specified interface.
Displays switchport configuration.
Displays the Protocol-Based VLAN information
for either the entire system or for the indicated
group.
Displays detailed information, including
interface information and dynamic vlan type,
for a specific VLAN.
Displays the VLAN associated with a specific
configured MAC address.
Displays the VLAN associated with a specific
configured IP subnet.
Configures the VLAN ID when the interface is
in access mode.
Forbids adding specific VLANs to a port.
Discards untagged frames at ingress.
Adds or removes VLANs from a port in General
mode.
Disables port ingress filtering.
Configures the PVID when the interface is in
general mode.
Configures the VLAN membership mode of a
port.
Defines a private VLAN association for an
isolated or community port or a mapping for a
promiscuous port.
Command Groups
a
Mode
PE
PE,
IC
PE
PE
PE
PE
IC
IC
IC
IC
IC
IC
IC
IC
114