Commands in this Chapter
This chapter explains the following commands:
mvr
mvr group
mvr mode
mvr querytime
mvr vlan
mvr immediate
mvr
Use the mvr command in Global Config and Interface Config modes to
enable MVR. Use the no form of this command to disable MVR.
Syntax
mvr
no mvr
Parameter Description
This command does not require a parameter description.
Default Configuration
The default value is Disabled.
Command Mode
Global Config, Interface Config
User Guidelines
MVR can only be configured on physical interfaces.
618
Multicast VLAN Registration Commands
mvr type
mvr vlan group
show mvr
show mvr members
show mvr interface
show mvr traffic