Show Dhcp L2Relay Vlan - Dell Networking 7048 Reference Manual

show dhcp l2relay vlan

Use the show dhcp l2relay vlan command in Privileged EXEC mode to
display whether DHCP L2 Relay is globally enabled on the specified VLAN or
VLAN range.
Syntax
show dhcp l2relay vlan
Parameter Description
Parameter
vlan-range
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
There are no user guidelines for this command.
Example
console#show dhcp l2relay vlan 100
DHCP L2 Relay is Enabled.
DHCP L2 Relay is enabled on the following VLANs:
100
vlan-range
Description
Show information for the specified VLAN range. A range may
be a single VLAN ID or two VLAN IDs separated by a single
dash with no embedded spaces.
DHCP Layer 2 Relay Commands
355