Dell Networking 7048 Reference Manual page 628

Syntax
show mvr members [
Parameter Description
The parameter is a valid multicast address in IPv4 dotted notation. The
following table explains the output parameters.
Parameter
MVR Group IP
Status
Members
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC, Config mode and all Config sub-modes
User Guidelines
The following table lists the completion messages.
Message Type
Successful Completion Message
Error Completion Message
Examples
console#show mvr members
MVR Group IP
------------------
224.1.1.1
628
Multicast VLAN Registration Commands
A.B.C.D
]
Description
MVR group multicast IP address.
The status of the specific MVR group. It can
be active or inactive.
The list of ports which participates in the
specific MVR group.
Message Description
None
MVR disabled
Status
---------------
INACTIVE
Members
---------------------
1/0/1, 1/0/2, 1/0/3