Routing Information Protocol - Dell Networking 7048 Reference Manual

Command
show ip irdp
a. For the meaning of each Mode abbreviation, see

Routing Information Protocol

Command
auto-summary
default-information
originate (Router RIP
Configuration)
default-metric
distance rip
distribute-list out
enable
hostroutesaccept
ip rip
ip rip authentication
ip rip receive version
ip rip send version
redistribute
router rip
show ip rip
Description
Displays the router discovery information for all
interfaces, or for a specified interface.
Mode Types
Description
Enables the RIP auto-summarization mode.
Controls the advertisement of default routes.
Sets a default for the metric of distributed
routes.
Sets the route preference value of RIP in the
router.
Specifies the access list to filter routes received
from the source protocol.
Resets the default administrative mode of RIP
in the router (active).
Enables the RIP hostroutesaccept mode.
Enables RIP on a router interface.
Sets the RIP Version 2 Authentication Type and
Key for the specified interface.
Configures the interface to allow RIP control
packets of the specified version(s) to be
received.
Configures the interface to allow RIP control
packets of the specified version to be sent.
Configures OSPF protocol to allow
redistribution of routes from the specified
source protocol/routers.
Enters Router RIP mode.
Displays information relevant to the RIP router. PE
on page 81.
Command Groups
a
Mode
PE
a
Mode
RIP
RIP
RIP
RIP
RIP
RIP
RIP
IC
IC
IC
IC
PIP
GC
142