Dell Networking 7048 Reference Manual page 717

show policy-map interface
Use the show policy-map interface command in Privileged EXEC mode to
display policy-oriented statistics information for the specified interface.
Syntax
show policy-map interface {gigabithethernet unit/slot/port|
tengigabitethernet unit/slot/port port-channel
{in|out}
Parameter Description
Parameter
port-channel
number
in
out
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
The following example displays the statistics information for port te1/0/1.
console#show policy-map interface te1/0/1 in
Interface..................................... te1/0/1
Operational Status............................ Down
Policy Name................................... DELL
Description
A valid port-channel identifier.
Show inbound service policies. The offered value indicates the
number of packets received by the classifier.
Show outbound service policies. The discarded value indicates
the number of packets discarded by the policy.
port-channel number
QoS Commands
}
717