groupid — The protocol-based VLAN group ID, which is automatically
•
generated when you create a protocol-based VLAN group with the vlan
protocol group command. To see the group ID associated with the name
of a protocol group, use the show port protocol all command.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the removal of the protocol-based VLAN
group identified as "2."
console(config)#vlan protocol group remove 2
switchport private-vlan
Use the switchport private-vlan command in Interface Config mode to
define a private VLAN association for an isolated or community port or a
mapping for a promiscuous port.
Use the no form of the command to remove the private VLAN association or
mapping from the interface.
Syntax
switchport private-vlan {host-association primary-vlan-id secondary-vlan-id
| mapping primary-vlan-id [add|remove] secondary-vlan-list}
no switchport private-vlan {host-association|mapping}
844
VLAN Commands