Show Ip Access-Lists - Dell Networking 7048 Reference Manual

Example
console#show service-acl interface gi1/0/1
Block CDP................................ Enable
Block VTP.................................Enable
Block DTP..................................Enable
Block UDLD................................ Enable
Block PAGP.................................Enable
Block SSTP................................ Enable
Block All................................. Enable

show ip access-lists

Use the show ip access-lists command in Privileged EXEC mode to display an
IP ACL and time-range parameters.
Syntax
show ip access-lists [
Parameter Description
Parameter
accesslistnumber
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
There are no user guidelines for this command.
304
ACL Commands
accesslistnumber
Description
The number used to identify the IP ACL.
]