Dell Networking 7048 Reference Manual page 133

Command
ipv6 pim ssm
show ipv6 pim
show ipv6 pim bsr
show ipv6 pim bsr-router
show ipv6 pim interface
show ipv6 pim neighbor
show ipv6 pim rphash
show ipv6 pim rp mapping
a. For the meaning of each Mode abbreviation, see
OSPF
Command
area default-cost (Router
OSPF)
area nssa (Router OSPF)
area nssa default-info-
originate (Router OSPF
Config)
area nssa no-redistribute
Description
Defines the Source Specific Multicast (SSM)
range of multicast addresses.
Displays global status of IPv6 PIMSM and its
IPv6 routing interfaces.
Displays the bootstrap router (BSR)
information.
Display the bootstrap router (BSR)
information.
Displays interface config parameters.
Displays IPv6 PIMSM neighbors learned on the
routing interfaces.
Displays which rendezvous point (RP) is being
selected for a specified group.
Displays all group-to-RP mappings of which the
router is aware (either configured or learned
from the bootstrap router (BSR).
Description
Configures the advertised default cost for the
stub area.
Configures the specified area ID to function as an
NSSA.
Configures the metric value and type for the
default route advertised into the NSSA.
Configures the NSSA Area Border router (ABR)
so that learned external routes are not
redistributed to the NSSA.
Mode Types on page 81.
Command Groups
a
Mode
GC
PE or
GC
PE or
GC
UE,
PE, or
GC
PE or
GC
PE or
GC
PE or
GC
PE or
GC
a
Mode
ROSPF
ROSPF
ROSPF
ROSPF
133