show ip igmp-proxy groups
Use the show ip igmp-proxy groups command in Privileged EXEC mode to
display a table of information about multicast groups that IGMP Proxy
reported. It displays status parameters only when IGMP Proxy is enabled.
Syntax
show ip igmp-proxy groups
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
The following example attempts to display a table of information about
multicast groups that IGMP Proxy reported.
console#show ip igmp-proxy groups
Interface Index................................ vlan13
Group Address
-------------
225.0.1.1
225.0.1.2
show ip igmp-proxy groups detail
Use the show ip igmp-proxy groups detail command in Privileged EXEC
mode to display complete information about multicast groups that IGMP
Proxy has reported.
Syntax
show ip igmp-proxy groups detail
986
IGMP Proxy Commands
Last Reporter
---------------
13.13.13.1
13.13.13.1
48
Up Time
Member State Filter Mode Sources
-------
------------ ----------- ------
7
DELAY-MEMBER Exclude
DELAY-MEMBER Exclude
0
0