Dell Networking 7048 Reference Manual page 275

Parameter
password
level
profile
encrypted
Default Configuration
The default privilege level is 1.
Command Mode
Global Configuration mode
User Guidelines
To use the ! character as part of the username or password string, it should be
enclosed within quotation marks. For example, username "test!xyz" password
"test!xyz" includes an exclamation point in both the username and password.
Up to 8 users may be created. If the password strength feature is enabled, it
checks for password strength and returns an appropriate error if it fails to
meet the password strength criteria. If the encrypted keyword is entered, no
password strength checking is performed as the password is encrypted and the
system does not have the capability of decrypting the password.
The following table lists the completion messages.
Description
The authentication password for the user. Range: 8-64 characters.
This value can be 0 [zero] if the no passwords min-length
command has been executed. The special characters allowed in
the password include ! # $ % & ' ( ) * + , - . / : ; < = >
@ [ \ ] ^ _ ` { | } ~.
The user's privilege level. Level 0 can be assigned by a level 15
user to another user to suspend that user's access. Range: 0-15.
Enter access level 1 for Read Access or 15 for Read/Write
Access.
The name of the administrative profile(s) to apply to this user.
An administrative profile is mutually exclusive with a privilege
level.
Encrypted password entered, copied from another switch
configuration. Password strength checking is not applied to the
encrypted string.
AAA Commands
275