Dell Networking 7048 Reference Manual page 110

Command
radius-server attribute 4
radius-server deadtime
radius-server host
radius-server key
radius-server retransmit
radius-server source-ip
radius-server timeout
retransmit
show aaa servers
show accounting methods
show radius statistics
source-ip
timeout
usage
a. For the meaning of each Mode abbreviation, see
Description
Sets the network access server (NAS) IP address
for the RADIUS server.
Improves RADIUS response times when servers
are unavailable. Causes the unavailable servers
to be skipped.
Specifies a RADIUS server host.
Sets the authentication and encryption key for
all RADIUS communications between the
switch and the RADIUS daemon.
Specifies the number of times the software
searches the list of RADIUS server hosts.
Specifies the source IP address used for
communication with RADIUS servers.
Sets the interval for which a switch waits for a
server host to reply.
Specifies the number of times the software
searches the list of RADIUS server hosts before
stopping the search.
Displays the list of configured RADIUS servers
and the values configured for the global
parameters of the RADIUS client.
Displays the configured accounting method
lists.
Shows the statistics for an authentication or
accounting server.
Specifies the source IP address to be used for
communication with RADIUS servers.
Sets the timeout value in seconds for the
designated radius server.
Specifies the usage type of the server.
Mode Types on page 81.
Command Groups
a
Mode
GC
GC
GC
GC
GC
GC
GC
R
UE or
PE
PE
UE or
PE
R
R
R
110