Private-Vlan - Dell Networking 7048 Reference Manual

Parameter Description
Parameter
host-association
promiscuous
Default Configuration
This command has no default configuration. By default, a port is neither
configured as promiscuous or host.
Command Mode
Interface Configuration (physical or port-channel)
User Guidelines
Do not configure private VLANs on ports configured with any of these
features:
• Link Aggregation Control Protocol (LACP)
• Multicast VLAN Registration (MVR)
• Voice VLAN
It is recommended that the private VLAN host ports be configured as
spanning-tree portfast.

private-vlan

Use the private-vlan command in VLAN Config mode to define a private
VLAN association between the primary and secondary VLANs.
Use the no form of the command to remove the private VLAN association.
Syntax
private-vlan {primary|isolated|community|association [add|remove ]
<vlan-list>}
846
VLAN Commands
Description
Configure the interface as a private VLAN host port. Host ports
are community or isolated ports, depending on the VLAN to
which they belong.
Configure the interface as a private VLAN promiscuous port.
Promiscuous ports are members of the primary VLAN.