Dot1X Guest-Vlan - Dell Networking 7048 Reference Manual

User Guidelines
This command has no user guidelines.
Example
console#clear dot1x authentication-history
Purge all entries from the log.
console#clear dot1x authentication-history gi1/0/1
Purge all entries for the specified interface from the log.
802.1x Advanced Features

dot1x guest-vlan

Use the dot1x guest-vlan command in Interface Configuration mode to set
the guest VLAN on a port. The VLAN must already have been defined. The
no form of this command sets the guest VLAN id to zero, which disables the
guest VLAN on a port.
Syntax
dot1x guest-vlan
no dot1x guest-vlan
vlan-id — The ID of a valid VLAN to use as the guest VLAN (Range: 0-
•
4093).
Default Configuration
The guest VLAN is disabled on the interface by default.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
Configure the guest VLAN before using this command.
vlan-id
802.1x Commands
885