Show Ethernet Cfm Maintenance-Points Remote - Dell Networking 7048 Reference Manual

show ethernet cfm maintenance-points remote

Use the show ethernet cfm maintenance-points remote command in
Privileged EXEC mode to display the configured remote maintenance points.
Syntax
show ethernet cfm maintenance-points remote {level
name
| detail [mac
0-7 vlan-id
level ] [vlan
Parameter Description
Parameter
domain
level
mac-address
vlan-id
mpid
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
console# show ethernet cfm maintenance-points remove level 1
------ ------- ----- ----------------- ---- ----------------- -----------
mac-address
| mep
]}
Description
Name of the maintenance domain (an alphanumeric string of
up to 43 characters in length).
Maintenance association level
The destination MAC address for which the information is
desired.
A VLAN associated with the maintenance domain. Range: 1-
4094.
The MEP ID from which the link trace message is to be
transmitted.
0-7
MEPId
] [domain
Ethernet CFM Commands
domain-
| domain
domain-name
|
459