Dell Networking 7048 Reference Manual page 631

Parameter Description
This command does not require a parameter description.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC, Config mode and all Config sub-modes
User Guidelines
The following table lists the completion messages.
Message Type
Successful Completion Message
Error Completion Message
Examples
The following table explains the output parameters.
Parameter
IGMP Query Received
IGMP Report V1 Received
IGMP Report V2 Received
IGMP Leave Received
IGMP Query Transmitted
IGMP Report V1 Transmitted
IGMP Report V2 Transmitted
IGMP Leave Transmitted
IGMP Packet Receive Failures
IGMP Packet Transmit Failures
Message Description
None
MVR disabled
Description
Number of received IGMP Queries.
Number of received IGMP Reports V1.
Number of received IGMP Reports V2.
Number of received IGMP Leaves.
Number of transmitted IGMP Queries.
Number of transmitted IGMP Reports V1.
Number of transmitted IGMP Reports V2.
Number of transmitted IGMP Leaves.
Number of failures on receiving the IGMP
packets.
Number of failures on transmitting the
IGMP packets.
Multicast VLAN Registration Commands
631