Dell Networking 7048 Reference Manual page 80

Table 1-1. System Command Groups
Command Group
Tunnel Interface (IPv6)
Virtual Router
Redundancy (IPv4)
Virtual Router
Redundancy (IPv4)
Utility Commands
Auto-Install
Captive Portal
Clock
Command Line
Configuration Scripting
Denial of Service
Line
Management ACL
Password Management
PHY Diagnostics
Power Over Ethernet
(PoE)
RMON
Serviceability Tracing
sFlow
SNMP
SSH
(continued)
Description
Managing tunneling operations.
Controls virtual LAN routing.
Manages router redundancy on the system.
Automatically configures switch when a configuration file
is not found.
Blocks clients from accessing network until user
verification is established.
Configures the system clock.
Manages the switch configuration files.
Provides several Denial of Service options.
Configures the console, SSH, and remote Telnet
connection.
Configures and displays management access-list
information.
Provides password management.
Diagnoses and displays the interface status.
Configures PoE and displays PoE information.
Can be configured through the CLI and displays RMON
information.
Controls display of debug output to serial port or telnet
console.
Configures sFlow monitoring.
Configures SNMP communities, traps and displays SNMP
information.
Configures SSH authentication.
Command Groups
80