Dell Networking 7048 Reference Manual page 710

Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
The following example displays the DiffServ information.
console#show diffserv
DiffServ Admin mode.......................... Enable
Class Table Size Current/Max................. 5 / 25
Class Rule Table Size Current/Max............ 6 / 150
Policy Table Size Current/Max................ 2 / 64
Policy Instance Table Size Current/Max....... 2 / 640
Policy Attribute Table Size Current/Max...... 2 / 1920
Service Table Size Current/Max............... 26 / 214
show diffserv service interface
Use this command in Privileged EXEC mode to display policy service
information for the specified interface.
Syntax
show diffserv service interface {gigabitethernet unit/slot/port|
tengigabitethernet unit/slot/port} {in|out}
Parameter Description
Parameter
in
out
710
QoS Commands
Description
Show ingress policies.
Show egress policies.