Show Qos Port - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

show qos port

Displays information about all QoS ports or a particular port.
show qos port [slot/port] [statistics]
Syntax Definitions
slot/port
statistics
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
Information for all ports is displayed unless a particular port is specified.
•
Use the qos port command to configure port parameters.
•
For ports that are trusted (Yes displays in the Trust field), the Trust field includes one of the following
characters:
character definition
+ Indicates that the port is manually configured as trusted through the
port trusted
trust setting configured through the
* Indicates that the port is automatically trusted regardless of the global set-
ting set through the
ports configured for 802.1Q.)
Examples
-> show qos port
Slot/ QoS
Port Act Enabled
4/1 No Yes
4/2 No Yes
4/3 No Yes
4/4 No Yes
4/5 No Yes
4/6 No Yes
4/7 Yes Yes
4/8 No Yes
4/9 No Yes
4/10 No Yes
4/11 No Yes
4/12 No Yes
page 38-54
The physical slot and port number. For example: 3/1.
Displays statistics for high-density gigabit modules.
command; the port setting takes precedence over the global
qos trust ports
Deflt Queues
Trust P/DSCP Deflt
No 0/ 0 8
No 0/ 0 8
No 0/ 0 8
No 0/ 0 8
No 0/ 0 8
No 0/ 0 8
No 0/ 0 8
No 0/ 0 8
No 0/ 0 8
No 0/ 0 8
No 0/ 0 8
No 0/ 0 8
qos trust ports command.
command. (Applies to mobile ports and
Bandwidth
Tot Physical Max Reserved
0 0K -
0 0K -
0 0K -
0 0K -
0 0K -
0 0K -
0 100M -
0 0K -
0 0K -
0 0K -
0 0K -
0 0K -
OmniSwitch CLI Reference Guide
QoS Commands
qos
Clsfy Type
-/<phy> - ethernet
-/<phy> - ethernet
-/<phy> - ethernet
-/<phy> - ethernet
-/<phy> - ethernet
-/<phy> - ethernet
-/<phy> - ethernet-100
-/<phy> - ethernet
-/<phy> - ethernet
-/<phy> - ethernet
-/<phy> - ethernet
-/<phy> - ethernet
November 2009