Setting The Output Conditions; Setting The Filter - Omron ZW-8000 Series User Manual

7-8 Setting the Output Conditions

Setting the Filter

Setting Filters p.152
Setting the Median Filter
Setting the Median Filter p.153
As an example, here is an explanation of the procedure for selecting the "5" median filter setting.
Operating procedure
Steps Key operation
1
2
3
4
5
6
7
242

Setting the Output Conditions

Display Description
Press and hold the
FUNC mode.
To save the setting, refer to "7-3 Functions of Operating Keys"
(p.222).
Press the
Press the
key.
Press the
key.
Select "MEDIAN" as the filter type.
Press the
key.
Select the filter mode from the following:
OFF / 3 / 5 / 9 / 15 / 31
The current setting value is displayed on the sub-display.
Press
In this example, select "5" and press the
Press and hold the
RUN mode.
To save the setting, refer to "7-3 Functions of Operating Keys"
(p.222).
key for two seconds or more to enter the
/ key to select MEAS, then press the
/ keys to select "TASK1" and press the
/ keys to select "FILTER" and press the
/ keys to select "MEDIAN" and press the
/ key to enter editing mode and the sub-display blinks.
key for two seconds or more to enter the
key.
key.
ZW-8000/7000/5000
User's Manual