4-5 Inspecting with the Edge Position Inspection Item
Edge Position
This inspection item is used to inspect positions. For example, it can be used to see if a label is attached at the
correct position or if a product is set in the correct position.
Places where the color changes greatly are called edges. The positions of these edges are measured.
Edge search
direction
Setup Procedure for Edge Position
Step 1
Selecting the Inspection Item
[Inspect]
1
Press an unused inspection item number and press
[Add item.].
2
Press [Edge position].
Registering inspection items: p. 50
58
Inspecting with the Edge Position Inspection Item
Sample Settings
Measurement region
Color of edge
to be found
Sample Measurement
An edge is detected within the region
according to set direction and color.
OK
NG
FQ User's Manual