Changing The Edge Level And Edge Direction - Omron ZG User Manual

Changing the Edge Level and Edge Direction

Set the edge level and edge direction when selecting edge-related measurement items.
This setting is enabled only in the EXP mode.
FUN mode-[MEAS]-[SENS]-[TASK1 to 8]-[CUSTOM]-[EDGELV]
Changing the edge level
Setting value
Edge level
Selecting the edge direction
Set the edge search direction.
Setting value
→ Forward direction
← Reverse direction
70
Measurement Settings
Description
Align the line of the edge level with the edge to be detected.
The range differs according to the CCD mode.
Standard and high-resolution mode: 0 to 399
High-speed mode:
Description
The "1st edge from the left" in the area is searched for.
The "1st edge from the right" in the area is searched for.
0 to 199
ZG User's Manual