Avaya Definity SI Maintenance Manual page 600

Maintenance Commands and Trouble-Clearing Aids
Endpoint Miscellaneous (EPT MISC) Information. EPT MISC contains
miscellaneous states and counters for an endpoint. Flags can y or n. Counters
start with 0x00, increment to 0xff, and wrap around to 0x01. AIM and VIS are BAS
commands that can be sent as input to MCU from an endpoint or as output from
MCU to an endpoint
Field descriptions
AIM
VIS
MIS
MCV
TALK
VRCV
BCTK
RTTK
8-350 Issue 4 May 2002
Audio Indicate Mutes.
"y" = For input, this endpoint mutes its audio. MCU does not
VAS to an endpoint displaying mute. For output, all other
endpoints in the conference mute their audio (have sent AIM to
MCU). MCU in turn tells this endpoint (by sending it AIM) that
there is no audio output from MCU.
"n" = For input, this endpoint does not mute (only if endpoint
audio mode is turned on). For output, an audio path opens
across the bridge.
Video Indicate Suppressed.
"y" = For input, this endpoint suppresses its video (video is
muted). For output, the MCU is not sending video to this
endpoint because there is no video broadcaster (broadcaster
does not join or broadcaster's video is invalid).
Multipoint Indicate Secondary-status.
"n" = For output, the endpoint is a valid source (not necessarily
at this moment). n is the correct state for the video.
"y" = MIS was sent to an endpoint considered to be a secondary
endpoint. The endpoint is included in the audio, but not video
portion of the conference. Video is not sent.
Multipoint Command Visualize.
"y" = For input, an endpoint requests to become a broadcaster.
This is used during Still Frame Graphics and to force
"presentation" mode.
"y" = The VC board detects voice energy from the endpoint. The
TALK counter indicates the number of starts or stops.
"y" = The endpoint is receiving video (MCU is sending video to
the endpoint). The VRCV counter counts the number of times
video sends or does not send to this endpoint.
Single screen and quad-screen presentation mode
conferences.
"y" = The endpoint is the video broadcast source. The BCTK
counter tallies the number of times this endpoint is the video
broadcast source.
Single screen conferences.
"y" = The endpoint is the return video source. The RTTK
counter tallies the number of times this endpoint is the return
video source.
555-233-123