Table of Contents
Advertisement
Maintenance Commands and Trouble-Clearing Aids
Other MOs Affected by this Command
NOTE:
Although alarms on some MOs appear as warnings, the alarms should be
investigated with user-related problems.
EPN Maintenance Circuit Pack (MAINT)
Expansion Interface (EXP-INTF)
ISDN-PRI Signaling Group (ISN-SGR)
Journal Printer (JNL-PRNT)
PMS Link (PMS-LINK)
PMS log printer (PMS-LOG)
Primary CDR Link (PRI-CDR)
Secondary CDR Link (SEC-CDR)
SPE Select Switches (SPE-SELEC)
Synchronization (SYNC)
System Communication Interface (PI-SCI)
System Printer (SYS-PRNT)
TDM Clock (TDM-CLK)
Tone Generator Circuit Pack (TONE-BD)
set signaling-group
This command upgrades secondary D-channel in specified signaling groups to
primary D-channels. Current primary D-channel then revert to secondary
D-channels.
A signaling group is a collection of B-channels that designate single D-channels or
a set of D-channels signals over an ISDN-PRI.
Action/Object
Qualifier
set
group
signaling-group
identifier
8-292
Issue 4 May 2002
Qualifier Description
administered number associated with
each signaling group.
Examples:
set signaling-group 1
set signaling-group 2
Feature
Logins
Defaults
Interactions
init
none
none
inads
craft
555-233-123
Advertisement
Table of Contents
Troubleshooting
