Save:power[:Start] - Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual

26
:SAVE Commands

:SAVE:POWer[:STARt]

Command Syntax
:SAVE:POWer[:STARt] [<file_name>]
<file_name> ::= quoted ASCII string
The :SAVE:POWer[:STARt] command saves the power measurement
application's current harmonics analysis results to a file.
If a file extension is provided as part of a specified <file_name>, it must be ".csv".
N O T E
See Also •
•
•
618
(see page 1138)
"Introduction to :SAVE Commands"
":SAVE:FILename" on page 609
Chapter 24, ":POWer Commands," starting on page 529
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
on page 607