Enable Access-List - Extreme Networks ExtremeWare Command Reference Manual

enable access-list

enable access-list <name> [counter | log]
Description
Enables message logging or the collection of access-list statistics.
Syntax Description
name
counter
log
Default
Counting is ON, logging is OFF.
Usage Guidelines
None.
Example
The following command enables statistics collection for access list allow102:
enable access-list allow102 counter
The following command enables logging of packets for access list allow102:
enable access-list allow102 log
History
This command was first available in ExtremeWare 6.0.
Platform Availability
This command is available on all platforms.
ExtremeWare Software 7.3.0 Command Reference Guide
Specifies the name of the access list.
Specifies that access-list statistics should be collected.
Specifies that a message should be logged to the Syslog facility for each
packet that matches the access-list description. The message details the
properties of the packet.
enable access-list
891