Disable Netlogin Ports - Extreme Networks ExtremeWare Command Reference Manual

Security Commands

disable netlogin ports

disable netlogin ports <portlist> vlan <vlan name>
Description
Disables Network Login on a specified port in a VLAN.
Syntax Description
portlist
vlan name
Default
N/A.
Usage Guidelines
Network Login must be disabled on a port before you can delete a VLAN that contains that port.
This command applies to both the web-based and 802.1x mode of Network Login. To control which
authentication mode is used by Network Login, use the following commands:
enable netlogin [web-based | dot1x]
disable netlogin [web-based | dot1x]
Example
The following command disables Network Login on port 9 in VLAN corp:
disable netlogin ports 9 vlan corp
History
This command was first available in ExtremeWare 6.2.
Platform Availability
This command is available on all platforms.
878
Specifies the ports for which netlogin should be disabled.
Specifies the VLAN on whose ports netlogin should be disabled.
ExtremeWare Software 7.3.0 Command Reference Guide