Displaying fabric properties from the FCIP Tunnels dialog box
Fabric properties are displayed on the FCIP Tunnels dialog box when you select a fabric.
(Figure
FIGURE 449
Troubleshooting FCIP Ethernet connections
1. Right-click a blade an Extension Blade or Switch from the Fabric Tree structure or Connectivity
2. Select the Port tab.
3. Select GigE from the Type drop-down list.
4. Select an Ethernet port.
5. Click Troubleshooting.
Brocade Network Advisor SAN User Manual
53-1003154-01
Displaying fabric properties from the FCIP Tunnels dialog box
449).
Fabric properties on the FCIP Tunnels dialog box
Map, and select Properties.
The following options are presented:
-
IP Ping — Tests connections between a local Ethernet port (ge0 or ge1) and a destination
IP address.
-
IP Traceroute — Traces routes from a local Ethernet port (ge0 or ge1) to a destination IP
address.
22
983