Lucent Technologies MERLIN Plus Release 2 System Manual page 91

For restricted voice terminals, if there is a check mark in one or more of the
"Allowed List Assigned" columns, do the following:
Enter administration mode.
1
The red lights go on next to Administer and Restrict.
Dial a * and a two-digit code (01 through 08) that corresponds to the list you
2
checked off to assign to the voice terminal.
Dial 00.
3
The green light goes on next to the Auto Intercom button for each voice terminal that has been
assigned this list.
Perform one of the following procedures:
4
Touch the Auto Intercom button for the voice terminal that you want to
>
assign the list.
Use the appropriate code from the Dial Code chart earlier in this section
>
under the heading "Using the BIS-22 Voice Terminal as an Administrator
Console" for the voice terminal to which the allowed list is to be
assigned.
Touch Administer.
5
The console beeps twice.
Continue to administer the system, or leave administration mode.
6
Systemwide Options 3-35