Lucent Technologies MERLIN Plus Release 2 System Manual page 132

Auto Answer-Intercom
DESCRIPTION
CONSIDERATIONS
ADMINISTRATION
PROGRAMMING
This feature is used with a Hands-Free Unit.
NOTE:
If your voice terminal has the Hands-Free-Answer-on-Intercom (HFAI) feature
or is connected to a Hands-Free Unit (HFU), you can have your speakerphone go
on automatically whenever you receive an intercom call. To do this with an
HFU, you must program an Auto Answer-Intercom button.
You can have both Auto Answer-Intercom and Auto Answer-All programmed
for your voice terminal, but both features cannot be activated at the same time.
None
Program the Auto Answer-Intercom feature on a button with lights.
To program an Auto Answer-Intercom button for your voice terminal:
Label the button Auto Answer-Intercom.
1
Slide the T/P switch to P.
2
The voice terminal rings every 5 seconds to remind you that you are programming and that
you cannot place or receive calls.
Touch the button you want to program.
3
Dial *70.
4
Slide the T/P switch to the center position.
5
T P
Auto Ans.-
Intercom
T P
70
MERLIN Plus System Features 5-13