Lucent Technologies MERLIN Plus Release 2 System Manual page 242

Passwords
You and others in your business must enter a password to use RLA.
The password is 5-digits and must be entered in order to gain access to an
outside line using RLA or to change the current call forward number from a
remote location. The first two numbers in the password are the caller's intercom
number.
To create or invalidate a password, follow this procedure:
Enter administration mode by sliding the T/P switch to P and touching
1
Administer.
Dial *56.
2
To create a password for a particular intercom number, dial a MERLIN Plus
3
system intercom number plus any three digits (except 000).
The console beeps twice.
To invalidate any password beginning with a particular intercom number,
4
dial the intercom number plus 000. Repeat the procedure for more passwords.
The console beeps twice.
Touch Administer.
5
The console beeps twice.
Leave administration mode by sliding the T/P switch to the center position.
6
T P
Administer
Number of Rings
To change the number of rings (the default is two rings) before the RLA call is
answered:
Slide the T/P switch to P and touch Administer.
1
Dial *763 plus the number of rings (between 0 and 9) before the RLA feature
2
picks up the call.
If the number of rings is set to 0, the voice terminal will not ring,
NOTE:
and the calls will be immediately answered.
Touch Administer.
3
The console beeps twice.
Leave administration mode by sliding the T/P switch to the center position.
4
T P
Administer
Administer
Icom. no.
56
+ 123
Administer
7630-
7639
MERLIN Plus System Features
T P
T P
5-123