Lucent Technologies MERLIN Plus Release 2 System Manual page 296

ADMINISTRATION
Basic telephones are able to receive ringing intercom calls, but not intercom
calls with voice announcement. Therefore, you must program the
Voice Announcement Disable feature for the telephone.
In order to program Voice Announcement Disable, Ringing Options, or an
Automatic Line Selection sequence for the basic telephone, the system
administrator can use the Centralized Programming feature on the
administrator/attendant console.
If your responsibilities do not include system administration, skip this
information.
Assign lines to the basic telephone:
1
Enter administration mode by sliding the T/P switch to P and touching
a
Administer.
Dial the intercom number or touch the Auto Intercom button for the basic
b
telephone that you are administering.
A green light comes on next to the Auto Intercom button. Green lights also come on next
to the buttons of any lines already assigned to the telephone.
Touch each line button so that the green light next to it shows the line
c
assignment you prefer.
Green light on = the line is assigned to the telephone
Green light off = the line is not assigned to the telephone
To restrict the type of calls that the basic telephone can place:
2
Touch Restrict until the green light next to it shows the code for the call
a
restrictions you want the telephone to have:
Steady green light = Unrestricted (all calls permitted)
Flashing green light = Toll restricted (local and intercom calls)
Green light off = Outward restricted (intercom calls)
When you are finished administering the basic telephone, touch
b
Administer.
The console beeps twice.
Leave administration mode by sliding the T/P switch to the center
c
position.
Then connect a MERLIN Plus system voice terminal directly to the control
3
unit voice terminal jack to which you plan to connect the BTMI. (You can
also program the basic telephone by using the Centralized Programming
feature on the administration/attendant console. For more information on this
feature, see "Centralized Programming.")
Program this substitute telephone for Voice Announcement Disable:
4
Slide the T/P switch to P.
a
Touch the Intercom button until the green light next to it goes off.
b
Accessory Equipment 6-5