Lucent Technologies MERLIN Plus Release 2 System Manual page 85

Dial the telephone number you want to include in the message.
4
For special phone numbers, such as 800 numbers, you may prefer to
NOTE:
have the recorded voice pronounce the number as "Eight hundred"
followed by the number, instead of "Eight, zero, zero." To do this,
touch Hold to enter a pause after the toll prefix and again after the
800 area code and then again after the exchange. For example,
1-800-555-1212 would be entered as:
Repeat the procedure for each line you are administering.
5
Touch Administer.
6
Continue to administer the system, or leave administration mode.
7
If you put a "0" in the column headed "Modify Message" for CF, follow this
procedure to turn off the voice message:
Enter administration mode.
1
The red lights go on next to Administer and Restrict.
Dial *30.
2
Dial 0 to turn off the message.
3
To turn on the message, dial 1 instead of 0 in step 3.
NOTE:
Touch Administer.
4
The console beeps twice.
Continue to administer the system, or leave administration mode.
5
To enter or change the call forwarding destination number from the
administrator console, use the following procedure:
Enter administration mode.
1
The red lights go on next to Administer and Restrict.
Dial *53.
2
Dial the destination number.
3
Touch Administer.
4
The console beeps twice.
Continue to administer the system, or leave administration mode.
5
1 Hold 800 Hold 555 Hold 1212
Line Assignments for Voice Terminals
3-29