Lucent Technologies MERLIN Plus Release 2 System Manual page 23

2-6 System Configuration Form
Activation of the ASA features requires a dedicated voice terminal jack on the
control unit. At startup, the system automatically reserves jack (intercom
number) 18 for the ASA features. But you can choose another voice terminal
jack for ASA during system administration, or you may decide not to use any of
the ASA features and assign intercom number 18 to a voice terminal. (To find
out more about the Automatic System Access features— Call Forwarding, Direct
Extension Dialing, System Answer, and Remote Line Access—see the entries
for them in Section 5, "Reference.")
Under "Voice Terminals" . . .
Do not write in a name next to intercom number 18 if you plan to use any of
the Automatic System Access features (unless you plan to assign an intercom
number other than 18 to ASA during system administration).
Cross out "(ASA)" next to intercom number 18 if you do not plan to use any
of the ASA features or you are assigning the ASA features to a different
intercom number. You can then treat intercom number 18 just like any other
intercom number as you assign them. If you are assigning the ASA features
to a different intercom number, write "ASA" next to the intercom number you
plan to use instead of intercom number 18.
Intercom Number 19
Notice on the form that "BB" and "Reports" appear in parentheses in the "Name"
column next to intercom number 19. The Busy Buster feature automatically
redials the last number you dialed up to 10 times and signals you if and when the
line begins to ring.
Operation of the BB feature requires a dedicated voice terminal jack on the
control unit. At startup, the system automatically reserves jack (intercom
number) 19 for Busy Buster. You can choose another voice terminal jack for
Busy Buster during system administration, or you may choose not to use
the BB feature and assign intercom number 19 to a voice terminal.
(For more information on Busy Buster, see the entry for "Busy Buster" in
Section 5, "Reference.")
Under "Voice Terminals" . . .
Do not write in a name next to intercom number 19 if you plan to use the
Busy Buster feature.
Cross out "BB" next to intercom number 19 if you plan to deactivate Busy
Buster during system administration or if you plan to assign it to a different
intercom number. (Intercom number 19 will still be reserved for the data
collector and printer which are used to print reports.) You can then treat
intercom number 19 just like any other intercom number when you assign
intercom numbers to voice terminals at the appropriate point in this planning
sequence. If you are assigning BB to a different intercom number, write BB
next to the intercom number you plan to use instead of intercom number 19.