Lucent Technologies MERLIN Plus Release 2 System Manual page 151

5-32 MERLIN Plus System Features
That there can be more than one CF/DXD button in the system, but a
voice terminal can have only one CF/DXD button:
If two or more users have a CF/DXD button programmed on their voice
terminals, each of them can turn the features on and off. For example, if one
of these users activates Call Forwarding, the red light goes on next to the
CF/DXD button on all the voice terminals that have that button. When a
person deactivates the feature by touching the CF/DXD button, the light goes
off next to the button on all the voice terminals that have the programmed
CF/DXD button.
A synthesized voice message:
This message is automatically supplied by the VSP in the control unit.
The administrator can modify the message when necessary or may choose to
turn off the message.
That one jack on the control unit be dedicated to the ASA features.
See "Automatic System Access" in this section for administration
procedures.
That you administer at least one line to an incoming and one line to an
outgoing line group:
At startup, none of the system's lines are assigned to the CF incoming or
outgoing line group.
If there is only one line in the incoming line group and one line in the
outgoing line group, they cannot be the same line. The green light next to the
CF button will flash when you try to turn it on.
When the system is in CF mode, the feature's operation affects only those
calls that come in on lines in the CF incoming line group. Likewise, the
system only uses the lines in the CF outgoing line group to forward calls.
Calls coming in on lines not assigned to the CF incoming line group are not
automatically answered for call forwarding.
Call Forwarding should be used only at night if your system has one or more
MERLIN Attendants, and you do not have dedicated lines for Call
Forwarding. To use Call Forwarding at night with the MERLIN Attendant,
activate this feature before leaving the office at the end of the business day,
and deactivate it as soon as your business day begins.
The Call Forwarding/Remote Line Access Disconnect Timer should be used
in conjunction with CF if your Central Office (CO) does not provide a
"forward disconnect" signal to your MERLIN Plus system. (See "Call
Forwarding/Remote Line Access Disconnect Timer" in this section.)